Einzelne Anschlüsse können von ADSL auf VDSL bzw. von VDSL auf ADSL umgeschaltet werden.
Ausgegangen wird von vorhandenen Spectrum Profilen für ADSL und VDSL. Ausserdem: VLAN 100 ist das VLAN der Bridge zwischen Anschluss-Port und Uplink-Port zum PPPoE-Server. Wenn Sie unser Konfigurations-Image verwenden oder nach unserer Anleitung vorgegangen sind, dann sind diese Vorbedingungen gegeben.
In diesen Beispielen soll Port 1/1/2/13 umgestellt werden.
configure xdsl line 1/1/2/13 transfer-mode ptm admin-up service-profile 1 spectrum-profile 1 dpbo-profile 1 configure bridge port 1/1/2/13 vlan-id 100 exit pvid 100 exit
ISAM >configure>xdsl>line>1/1/2/13# info configure xdsl #------------------------------------------------------------------------------- echo "xdsl" #------------------------------------------------------------------------------- line 1/1/2/13 service-profile 1 spectrum-profile 1 dpbo-profile 1 admin-up transfer-mode ptm exit #-------------------------------------------------------------------------------
ISAM >configure>xdsl>line>1/1/2/13# show xdsl operational-data line 1/1/2/13 detail
================================================================================
line table (detailed)
================================================================================
--------------------------------------------------------------------------------
line
--------------------------------------------------------------------------------
if-index : 1/1/2/13 adm-state : up
opr-state/tx-rate-ds : up :100001 tx-rate/us : 36154
tx-rate/ds : 100001 max-tx-rate-us : 36182
max-tx-rate-ds : 121898 inp-up : 0
inp-dn : 0 interl-us : 0
interl-ds : 0 cur-op-mode : g993-2-17a
rinit-1d : 0 actual-tps-tc-mode : ptm
rtx-mode-up : forbidden rtx-mode-dn : forbidden
================================================================================
ISAM >configure>xdsl>line>1/1/2/13#
configure xdsl line 1/1/2/13 service-profile 1 spectrum-profile 2 dpbo-profile 1 transfer-mode atm admin-up configure atm pvc 1/1/2/13:1:32 configure bridge port 1/1/2/13:1:32 max-unicast-mac 4 configure bridge port 1/1/2/13:1:32 vlan-id 100 configure bridge port 1/1/2/13:1:32 pvid 100
Achtung: Wenn Sie einen 7353 ISAM CX verwenden, dann müssen Sie hier auf das spectrum-profile 3 aus unserer Beispiels-Konfiguration umschalten.
ISAM >configure>xdsl>line>1/1/2/13# info configure xdsl #------------------------------------------------------------------------------- echo "xdsl" #------------------------------------------------------------------------------- line 1/1/2/13 service-profile 1 spectrum-profile 2 dpbo-profile 1 admin-up transfer-mode atm exit #-------------------------------------------------------------------------------
ISAM >configure>vlan>shub>id>100# show xdsl operational-data line 1/1/2/13 detail
================================================================================
line table (detailed)
================================================================================
--------------------------------------------------------------------------------
line
--------------------------------------------------------------------------------
if-index : 1/1/2/13 adm-state : up
opr-state/tx-rate-ds : up :17845 tx-rate/us : 2249
tx-rate/ds : 17845 max-tx-rate-us : 2253
max-tx-rate-ds : 17924 inp-up : 0
inp-dn : 0 interl-us : 0
interl-ds : 0 cur-op-mode : g992-5-aj
rinit-1d : 0 actual-tps-tc-mode : atm
rtx-mode-up : forbidden rtx-mode-dn : forbidden
================================================================================